Agriculture & Irrigation — Project Proposal

Agriculture & Irrigation — Project Proposal

Tell us about your agriculture and irrigation project

Choose the measurements and irrigation functions you need, including leaf wetness, leaf temperature and solenoid valve control. We will use your answers to assess suitable sensors, controllers, connectivity and the monitoring or control application.

Complete the applicable sections below and send your request. Sensor counts apply only to selected measurements. Irrigation questions apply only when you need solenoid valve control; existing-valve details apply only to existing or mixed installations. Leave the other sections blank.

What does your project need?

Measurements and irrigation control (Required)

Select one or more options. Sensor locations and independently controlled irrigation zones are counted separately. You can also ask us to recommend a solution.

Number of sensor locations (Required)

Complete this section only if you selected sensor measurements above.

Count each planned installation location or device once, even if it measures both leaf wetness and temperature. Enter independently controlled irrigation zones separately.

Enter a whole number greater than zero. For existing sensors used only for irrigation control, describe them in the equipment notes instead.
Number of independently controlled irrigation zones (Required)

Complete this section only if you selected solenoid valve controllers / irrigation control above.

Count watering circuits that must operate separately. This does not assume one controller per valve. If the total number of valves differs, describe it in the irrigation notes.

Enter a whole number greater than zero. Count independent watering circuits, not sensors or controllers.
For example: olive trees, 4 hectares; or greenhouse tomatoes, 2,000 m². Include the unit and number of separate plots if known.

Connection, application and irrigation requirements

Connection or existing system (Required)
Monitoring / control application (Required)
For example: farm software, an irrigation control system or an IoT platform.
If known: existing sensors, internet / mobile coverage, LoRaWAN gateway and its power. Irrigation may use existing sensor readings, subject to assessment.

Irrigation installation requirements

Complete this section only if you selected solenoid valve controllers / irrigation control above.

These answers describe the installation. Controller, valve, power supply and application compatibility will be checked in the proposal.

Tell us if you want to use existing sensors. Automation requirements will be assessed for your installation.
If existing valves will remain, their type and model will help us assess the installation.
This is separate from the valve coil voltage. Gateway power and internet are assessed separately.
For example: total valves, multiple valves per zone, existing controller / sensor connections or available DC voltage. Unknown details can be assessed later.

Complete these details only if existing valves will be used, including a mix of existing and new valves.

The coil specification helps us select a suitable controller. If known, add the model below and whether the coil is latching or continuously powered.
Include any known brand, model, coil information or current control equipment.

How can we contact you?

We will use these details to respond to your project enquiry.

If the installation location has no postal code, enter N/A.

Add any other installation requirements, preferred timescale or equipment preferences. Use the irrigation fields for valve details. Up to 1,200 characters.

Review your project request

Your answers above will be included with your request. Check them before sending.

Your details will be used to respond to this enquiry, as described in our Privacy Policy.