Energy Metering & Monitoring Solution – LoRaWAN & Modbus (EU868)

Energy Metering & Monitoring Solution – LoRaWAN & Modbus (EU868)

Availability: Usually in stock

Price upon request

Vendor:

See where your facility uses electricity

How much energy goes into refrigeration, air conditioning and lighting? Which circuit causes demand peaks, and which equipment keeps running when the building is empty? InviBIT designs complete electricity metering and remote monitoring solutions, from one distribution board to facilities across multiple locations.

We combine wireless LoRaWAN EU868 meters, wired RS485 / Modbus RTU meters and a suitable monitoring application. This brings consumption by supply, circuit or end use into one view, providing a practical basis for reviewing energy performance and measuring the effect of changes.

Wireless, wired or a combination of both

Wireless LoRaWAN

Compatible meters send readings to a LoRaWAN gateway and onward to the application. This suits distributed panels and locations where installing new communication cables is difficult. Gateway placement and radio coverage are assessed for the actual site.

Wired Modbus

RS485 / Modbus RTU meters connect to an appropriate data collector or automation system. The design can use existing communication cabling and integrate with a BMS or SCADA system after compatibility has been checked.

A mixed installation

Wireless and wired measurement points can appear in the same application. A suitable RS485-to-LoRaWAN bridge can also transmit selected readings from compatible Modbus meters, with register mapping and polling intervals configured for the project.

Architecture of LoRaWAN metering, wired Modbus metering and a hybrid connection to a shared monitoring application.
Illustrative architecture. Modbus meters use either an IP collector or a LoRaWAN bridge, according to the project. Select the image to enlarge.

Wireless data transmission reduces communication cabling. Electrical connections and installation of meters and current transformers still require a qualified electrician.

Measurements that support day-to-day decisions

Consumption by end use

Record energy in kWh and compare days, periods, spaces or circuits. Separately metering refrigeration, HVAC, lighting and other loads helps identify where further investigation is needed.

Power and electrical parameters

Monitor active power, voltage, current and power factor where the selected meter supports them. Identify peaks and compare the load profile before and after operational changes.

Alerts and selective control

The application can be configured for thresholds, unusual consumption or missing data. Where required, compatible smart sockets or controllers add remote ON/OFF for selected, suitable loads.

One dashboard for the complete picture

View readings from a computer or mobile device: total consumption, load profiles, period comparisons and individual measurement points. Data history, reports, user access and notification channels are defined in the project proposal.

Illustrative InviBIT dashboard with daily energy of 428.6 kWh, latest active power of 18.6 kW, weekly consumption and end-use breakdown. Sample data.
Illustrative dashboard with sample data. The final application is configured for the project. The example cost uses €0.20/kWh, excluding taxes and fixed charges. Select the image to enlarge.

Update intervals depend on the devices, network and monitoring requirements. An end-use breakdown requires separately measured circuits; a single main meter does not automatically identify the consumption of individual appliances.

Selected equipment from our range

These products illustrate options for different installations. Models, quantities and accessories are specified after reviewing the supplies and measurement points.

Eastron SDM230 LoRaWAN MID

Eastron SDM230 LoRaWAN MID

Single-phase, 100 A direct-connected metering with wireless EU868 communication. For individual supplies and distribution boards.

Eastron SDM630MCT-LR

Eastron SDM630MCT-LR

Three-phase LoRaWAN energy metering with compatible external 1 A / 5 A current transformers. For larger feeders and plant equipment.

Eastron SDM120-M Modbus

Eastron SDM120-M Modbus

Compact, single-phase 45 A energy meter with RS485 / Modbus RTU. For wired submetering in electrical panels.

Eastron SDM630-Modbus MID

Eastron SDM630-Modbus MID

Three-phase, direct-connected energy meter up to 100 A per phase. Wired communication with a compatible Modbus collector.

Milesight CTH01

Milesight CTH01

LoRaWAN power monitor with 12 current inputs and 3 voltage inputs. Supports up to 12 single-phase or 4 three-phase circuits with compatible RJ11 sensors.

Milesight WS523

Milesight WS523

LoRaWAN smart socket for appliance energy monitoring and remote ON/OFF. Select the EU version and check the load type and switching requirements.

Dragino: wireless current monitoring

For monitoring the operation of machinery, refrigeration units and other loads, the CS01 range sends current readings wirelessly to the monitoring system. The converter and current transformers are selected together to suit the installation.

Dragino CS01-LB — LoRaWAN EU868 current monitoring

Dragino CS01-LB

Four-channel LoRaWAN EU868 current-sensor converter for monitoring loads and equipment operation. Connects to compatible external current transformers selected for the required measurement range.

Dragino CS01-LB2 — LoRaWAN EU868 current monitoring

Dragino CS01-LB2

Four-channel LoRaWAN EU868 current-sensor converter with a 19,000 mAh battery. An alternative for monitoring current across several circuits; compatible current transformers are selected separately.

Dragino SCT013G-D-100 — current transformer for Dragino CS01

Dragino SCT013G-D-100

Split-core current transformer rated 100 A / 50 mA, for compatible Dragino CS01 inputs. Its 16 mm aperture is suitable for conductors within that diameter.

Dragino SCT024-300 — current transformer for Dragino CS01

Dragino SCT024-300

Split-core current transformer rated 300 A / 50 mA with a 24 mm aperture, for compatible Dragino CS01 inputs. Selected according to the circuit current and conductor dimensions.

CS01-LB and CS01-LB2 measure current. For actual energy metering in kWh, select a suitable energy meter. The transformers shown have 50 mA outputs and must not be substituted with 1 A or 5 A models.

For current and equipment-operation monitoring, options include Milesight CT101, CT305 and Dragino CS01-LB. Current-only sensors do not provide the same energy measurement as meters that also measure voltage. Any kWh calculation based on configured voltage and power factor is an estimate.

Current transformers are matched to the meter: primary range, aperture and 1 A / 5 A, mA or proprietary connection must be checked. For example, CTH01 uses compatible Milesight RCT-RJ11 sensors. Browse all energy and power monitoring products and current transformers.

Typical applications

Retail and supermarkets

Separate visibility of refrigeration, HVAC, lighting and distribution boards. Compare consumption while the store is open and when it is closed.

Hotels and commercial buildings

Meter floors, supplies or functional areas. Give facility teams a shared view and a basis for assessing energy improvements.

Industry and warehouses

Monitor machines, motors, pumps and auxiliary loads. Identify extended running hours and changes in consumption patterns.

Public buildings and multiple sites

Bring readings from several facilities together, with clearly identified measurement points and common reports for authorised users.

A complete solution, specified for your project

InviBIT can provide meter and accessory selection, communication design, device configuration and setup of the monitoring application. Equipment, installation, integration with existing systems, platform access and support are itemised in the quotation.

For an initial proposal, tell us the number of measurement points, single-phase or three-phase supplies, expected currents, and available Modbus, LoRaWAN or Internet connections. Please also specify whether you need metering only or control of selected loads.

Price upon request

The equipment and services are selected for the requirements of your installation.

Request a project proposal

ApplicationElectricity metering, submetering and remote monitoring for commercial and industrial installations.
Supply configurationSingle-phase and three-phase, according to the selected meters.
Wireless communicationLoRaWAN EU868; compatible gateway and network server required.
Wired communicationRS485 / Modbus RTU through a suitable collector or automation system.
Hybrid connectionCompatible Modbus meters can connect through a configured RS485-to-LoRaWAN bridge.
Electrical parameterskWh, active power, voltage, current and power factor, where supported by the selected meter.
Current transformersRange, secondary output and connector are matched to the meter; selected separately where required.
DashboardHistory, charts, comparisons, reports and alerts are configured within the agreed software scope.
Remote controlOptional, through compatible load-control devices; subject to load suitability.
Update intervalDefined according to device capabilities, network conditions and project requirements.
Delivery scopeModels, quantities, installation, platform services and support are specified in the quotation.

Shipping Policy We provide worldwide shipping using only tracked shipping services. Currently all our international shipments are performed by TNT Express and FedEx. Local shipments to Greece are performed either directly from us or using local shipping couriers (i.e. ELTA Courier). We ship products within 1-3 days after the order is placed. You will be notified by email when your order is dispatched and you will receive the relevant shipment tracking number which you can use to track your shipment. Shipment Tracking You can use the following links to track your order using the provided tracking number in the case of international orders. Orders shipped with TNT Express: TNT Tracking Orders shipped with FedEx: FedEX Tracking General Return Policy We have a 30-day return policy, which means you have 30 days after receiving your item to request a return. To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. To start a return, you can contact us at info@invibit.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. For any further information, help and support regarding the shipping and/or return process you can contact us at: Email: info@invibit.com Telephone: +30 210 421 2380